ytopsun

    • HOME
    • PRODUCT
    • NEWS
    • ABOUT
    • SERVICE
    • CONTACT
    中
    • GDY SERIES ONE PIECE SS WATER COOLED COOLING BELT WITH FLAKER

    • GDY SERIES2222 ONE PIECE SS WATER COOLED COOLING BELT WITH FLAKER

    • GDY SERIES3333 ONE PIECE SS WATER COOLED COOLING BELT WITH FLAKER

    AIR CLASSIFIER MILL (ACM ) GRINDING & CLASSIFYING SYSTEM

    The ACM micro grinding system is designed with high speed grinding, air classifying, cyclone separating, sifting, and extra fine powder collecting. The particle size distribution can be adjusted to coincide with the requirement of coatings and other product such as pigment, calcium carbonate, medicine and food.

  • Container Mixer

    Automatic container mixer is working with continuous material trolleys, the container filled with materials and lifted up and connected tightly with mixing head automatically, the mixing head tilts together.
    with the containers, and then obtain the homogeneous mixing result, after finishing mixing as per setting time, and return to original position, the whole process will be controlled by PLC.

  • Cooling Belt With Flaker

    After discharging as hot melt materials ,the materials falling down into the cooling rollers gap , and squeezed into thin layer and cooled down as well , and then tranported by the conveyor belt to the flaking end , also repeated cooling by spraying water from the bottom of the belt , and will get brittle chips after being crushed by flaker , collected by trolleys to next stage milling.

  • Twin Screw Extruder

    consistent quality powder coating continuous production as extrusion stage :
    after finishing premixing materials from mixer , they are fed into barrel zone after volumetric feeder,within barrel , it pass feeding, conveying, kneading and discharge end , then get hot melt materials , with designed speed and suitable residence time , and can get ideal output and excellent dispersion result , individually charactersized to your requirements.

    • Pre-weighing prior to powder coating mixing

      2020-5-17

      The batching together of all the raw materials necessary for one mix of the product formulation consisting in the main, of full bags (25Kg) of the bulk raw materials and weighed small amounts to make up the pigments and the small amounts of material above or below multiples of 25Kg.

    • Reasons regarding powder coating mixing issue

      2020-5-17

      For the manufacturing of Powder Coatings there is required a pre-mix feedstock for the extruders that is a complete homogeneous mix of all the raw materials to be fed into the extruder.

    • FOLLOWING COATING EVENTS

      2015-8-20

      in the second half year of 2015, we will continuously attend some overseas Coating event like Turkey , Iran etc .

PRODUCTS OF TOPSUN
Production line
Mixer
Twin Screw Extruder
Cooling Belt
Grinding System
Spare Parts

DONGSUN POWDER PROCESSING EQUIPMENT CO.,LTD.

Copyright (c) 2015 TOPSUN. All Rights Reserved